Upgrade all of those common, aging, dry-rotted rubber hoses under the hood of your vehicle with our durable, Silicone 9-piece Coolant Hose Set. These perform and look great within any engine bay, they are made to last longer than standard rubber hoses and are perfectly molded to the OE hose specifications for a simple installation on most vehicles. Made from heavy duty, 4-ply fiberglass reinforced silicone, this silicone coolant hose set can handle higher temperatures and greater pressure than the stock, squishy rubber hoses. Designed to resist oil, fuel and electrochemical degradation and tested up to continuous 250° Fahrenheit operating temperature and over 45psi, you can expect to achieve greater reliability, less turbulence and improved flow with our smooth silicone hoses. Included in this hose set our expertly spec'ed out smooth band, stainless steel German-style hose clamps that replace the OE pinch clamps. Each clamp is specifically selected to reduce tail overhang and to achieve constant clamping pressure to the fitting/hose assembly. Each set replaces the following coolant hoses and clamps: Expansion tank vent hose 8-16mm Hose Clamps - QTY 2 Expansion tank feed hose 16-27mm Hose Clamps - QTY 2 Heater core vent hose to water line (over rear timing chain housing) 8-16mm Hose Clamps - QTY 2 Heater core vent hose to 4 way upper radiator fitting 8-16mm Hose Clamps - QTY 2 Upper radiator hose Rear cylinder head coolant flange to 4 way fitting 25-40mm Hose Clamps - QTY 2 Upper radiator hose - 4 way fitting to 3 way fitting 25-40mm Hose Clamps - QTY 2 Upper radiator hose - 3 way fitting to radiator quick coupling 25-40mm Hose Clamps - QTY 2 4 way fitting to thermostat water inlet tube hose 20-32mm Hose Clamp - QTY 1 (4 way fitting) 16-27mm Hose Clamp - QTY 1 (inlet tube) Oil cooler outlet hose 12-20mm Hose Clamp - QTY 2 With the smoother internal passageways, consistent hose internal diameters, and smoother bends will result in improved flow for greater cooling system performance with added durability. The perfect way to take the worry out of your coolant hoses and keep your engine from potentially overheating. * This kit is designed for the FSI engine only. This can easily be found on the engine cover of your 2.0T VW/Audi. It will clearly be stamped FSI (not TFSI). * Does not apply to Golf R models. **Some applications with restricted working room may need to place vehicle in service mode to gain access to all replacement coolant hoses.
