Instructions:
1. Using the Guide tool, clean off the contact rim and coat with fresh engine oil. Secure the Guide tool?with the screws?to the crankshaft.
2. CAUTION! - Make sure all components are properly aligned prior to installation of seal. Carefully slide the crankshaft seal over the Guide tool in a straight and rotational movement until it is aligned with the crankcase.
3. Position the Press Sleeve over the Guide tool. Carefully hand-tighten the Nut to ensure the seal lines up correctly.
4. After inspection of the seal and all components, begin tightening the Nut until the seal sits flush with the crankcase. CAUTION! - Do NOT overtighten and damage the seal. Seal is now properly installed. Carefully remove all components.
