Increase the strength and consistency of your ignition system with an IE Coil Conversion & ICM Delete kit. A must-have when converting your problematic AEB or ATW 1.8T coilpacks to newer FSI R8 or TSI coilpacks.
Early B5 A4 & Passat 058 engines (AEB & ATW engine codes) are equipped with three-wire factory coilpacks and ICM control units. This easy plug-and-play adapter kit deletes the problematic factory ICM unit and converts the coilpack harness to a four-wire output. This allows you to install a set of IE Billet Coilpack Adapters and newer technology coilpacks found on VW/Audi 2.0T FSI, TSI, and Audi R8 engines. Upgrading to FSI/R8 coilpacks will allow you to run a larger spark plug gap while maintaining a strong spark output. Replacing your outdated coilpacks with the newer technology has shown increased reliability, smoother idle, increased off boost power, and in some cases improved fuel economy. You will also be able to replace a coilpack by hand without the use of tools, this is not possible with the factory bolt-down style coilpacks.
*NOTE: Early B5 A4 & Passat 058 engines (AEB & ATW) are equipped with a three-wire factory coilpacks and ICM control units and are not directly compatible with four wire R8 FSI/TSI coilpacks. These are the only 1.8T 20V engines that will require an IE Coil Conversion & ICM Delete Kit, all other engine codes are directly compatible without an adapter harness kit.
COMPATIBLE COILPACK OPTIONS
COILPACK ADAPTERS
IE billet aluminum coilpack adapters bolt down to the factory valve cover allowing you to safely run the longer stem coilpacks. Available in raw aluminum, red anodize, or black anodize finishes to add style to your engine bay. - IE Part Number: IEBAVA11
?
