*Prior to ordering check the pins to see if you have round or flat! The difference between a round pin and a flat pin coil is determined by the pins that connect the coil to the wiring harness and can be easily determined as follows. Slide the red locking tab to the right, press down on the tab and pull the connector off the coil. Check connector to see if you have flat pins or round pins. Push the connector back on until it clicks in place and slide the red locking tab back to the left, locking position.
This performance coil pack is used by most MINI owners as the performance option to the stock coil.
You will have to remove the factory bolts and from your old coil and remove the MSD factory sleeves to insert and drill out 1/16" to allow the stock bolts to fit.
Kits include
Inductance:7mH
Maximum voltage:36,000 Volts
Primary resistance:.51 OHMs
Secondary resistance:12K OHMs
Turns ratio:77:1
