Rear upper shock mounts (33506771738) are a very common failure point on E9x vehicles. Turner Motorsport set out to design the ultimate upper rear shock mount so that you won't have to do this job time and time again. The monoball rear upper shock mount eliminates unwanted deflection, maximizing shock efficiency and performance. Additionally, these allow for full body articulation for low friction movement, reduced side loading and improved shock wear. Turner's monoball rear upper shock mounts offer two options for shock position - raised 7.5mm from OE and lowered 4mm from OE. This flexibility allows you to either retain the OE Bump stop retaining washer and rear shock boot with the lowered 4.5mm setup?OR you can run the 7.5mm raised setup for increased shock travel - this is particularly beneficial on lowered vehicles! NOTE: You may experience a slight increase in NVH when using Turner monoball rear upper shock mounts, but we think it is justified by the eliminated deflection and setup flexibility offered by this kit.
We also recommend doing the Turner rear lower shock mounts - ES3537564
INTENDED FOR USE ON 10.5mm shock pin diameters. We recommend checking your shock pin diameter before ordering.
Design features:
