APR 3.0/4.0 TFSI Coolant Performance System (CPS) | Performance parts and accessories for Audi, BMW, Volkswagen, Mini, Mercedes Benz, Porsche and Volvo

APR 3.0/4.0 TFSI Coolant Performance System (CPS)

(No reviews yet) Write a Review
APR 3.0/4.0 TFSI Coolant Performance System (CPS)
APR 3.0/4.0 TFSI Coolant Performance System (CPS)
APR 3.0/4.0 TFSI Coolant Performance System (CPS)
APR 3.0/4.0 TFSI Coolant Performance System (CPS)
APR 3.0/4.0 TFSI Coolant Performance System (CPS)
MPN:
MS100127
SKU:
MS100127
Availability:
In Stock

Product Overview

The APR Coolant Performance System (CPS) is a massive front-mounted cooler upgrade that dramatically reduces intake air temperature (IAT), minimizes heat soak, and provides increased performance! It is 140% larger than the stock B8 unit and features a self-bleeding cooling circuit to ensure it is always operating at peak performance. The system is easy to maintain and fully integrated into the factory cooling circuit. This upgrade is highly recommended at every stage!

Quick Facts:

  • Dramatically lowers intake air temp (IAT)
    Increases and retains HP while minimizing power-robbing heat soak!
  • Massive frontal surface area (core) and volume (radiator)
    29" x 05.5" x 2.1" – 159.5"² & 054"³ - OEM B8
    22" x 17.4" x 1.7" – 382.8"² & 130"³ - APR
  • Highly effective dual-pass core design
    Tightly packed external louvered fins rapidly dissipate heat as coolant flows through internal cooling paths.
  • Self-bleeding and self-optimizing system
    Air-bubbles trapped within the system kills performance! The self-bleeding system constantly removes air from the system, without any manual intervention!
  • Retains factory safety and control
    The ECU retains full control over the system, protecting against pump failure and coolant leaks.
  • Easy to install and maintain
    All the performance without the headaches. Each system is fully pressure tested after assembly.

The 3.0 TFSI uses a liquid-to-air intercooling cooling circuit. A front mounted radiator is responsible for cooling hot coolant, while two heat exchangers within the supercharger are responsible for cooling the supercharged air before it enters the engine. The turbocharged 4.0 TFSI uses a similar system with a single heat exchanger after the turbochargers.

The Problem:

The front mounted radiator is tiny. Air trapped within the system devastates the cooler’s effectiveness, while the sheer lack of surface area and coolant volume makes for a system incapable of keeping up with the cooling demands at higher performance levels.

The APR Solution:

The APR Coolant Performance System replaces the front mounted radiator with a much larger and more capable dual-pass unit. It has 140% more frontal surface area and holds 141% more coolant than the factory B8 unit. Tightly packed louvered fins rapidly dissipate heat over a much wider area than the factory unit.

Next, APR CPS incorporates a unique self-bleeding system into the cooler design. Keeping up with manual bleeding is messy, and all but impossible. However, the APR system continuously self-bleeds, increasing the coolers effectiveness automatically!

The result is simple: More horsepower over a much wider operating range!

Reviews

(No reviews yet) Write a Review